4 Stage CNC Billet Catch Can for External Breather Systems

By January 4, 2019New Product News

4 Stage CNC Billet Catch Can for External Breather Systems

DK Custom Products 4 Stage Billet Catch Can for External Breather Systems are CNC-Machined Aluminum. The 4 Stage Internal Filtration System with a Vented Cap, keeps the oil in the Catch-Can until emptied. 1 1/2″ Diameter 2 5/8″ Tall. For use with 3/8″ ID hose. Made in the USA. Available in Aluminum or Powder Coat Black Finishes.

Perfect for DK Custom Products

Discrete & Premium Discrete

External Breather Systems

Made in The USA!

Features and Specs:

  • Black CNC-Machined Aluminum
  • Vented Cap
  • 4 Stage Internal Filtration System
  • 1 Extra O-Ring
  • 1 1/2″ Diameter 2 5/8″ Tall
  • Hose barb for 3/8″ ID hose (same as hose barbs on EBS)
  • Also available-Aluminum Finish HERE
  • Made in the USA!

Hundreds of hours of research and thousands of miles of riding have resulted in this 4 Stage Catch-Can that allows air to pass through but keeps the oil and water in the Catch-Can on typical Harley’s.

See the photo’s of the 8 different components that make up the 4 Stage System.  Even with the worst spitters most of the water and oil stays in the Catch-Can!

Designed for the hot, oily, watery, oxygen-depleted air to pass thru the tube, exiting near the bottom.

Most of the oil and water will drop into the low density foam.  The air, and some atomized water and oil hits the first separator, stopping some of the liquid, but allowing the air to continue on through the high density foam.  There are two more separators and two more pieces of high density foam that work at stopping the liquid, but let the air exit the vent holes in the cover.

Periodic emptying of the Catch-Can is easy.  Simply unscrew the can from the lid and dump it.

Cleaning of the foam and separators is not necessary, but easy to do if one wishes.

There is an extra O-Ring included, should the installed O-Ring get lost or damaged.

There is also a refresh kit with extra O-Rings and filtration system that is an option or can be purchased separately.

The EPA has required Harley to route hot, dirty, oily, oxygen depleted crankcase air back into the air cleaner compromising the performance & longevity of your engine. When using an External Breather System, your bike will run better and last longer.

This Catch Can is a nice option that will work with your Discrete or Premium Discrete Breather System.

Also available in Machine Cut Aluminum Finish that can be polished to a mirror finish, see at this LINK

Patent Pending

DK-4ST-CC-MCF $49.95

www.dkcustomproducts.com